Windows Fax And Scan Not Detecting Scanner

Return to site

Windows Fax And Scan Not Detecting Scanner

The problem is the feature in windows fax and scan is called 'scan routing' (its under tools) when you click on scan routing there is a check box next to folder location. As the feature explains itself you type the network location in the box, click the check box to 'enable it' and hit save. I have a PIXMA MG3500 printer/scanner. I installed all the updated software and drivers on my Windows 10 desktop. I can print via wireless but the scanner is not recognized by Windows Fax and Scan unless I connect the device via USB. I've uninstalled and reinstalled several times and still cannot ge.
Windows Fax And Scan Windows 10
Help And Support Windows Fax And Scan
Windows Fax And Scan Not Detecting Scanner
Windows 10 Fax And Scan Install
'No scanners were detected' is a common problem in Windows 10. Quite a few users have reported that when they were trying to scan files or documents with the Windows Fax and Scan, they received an error message saying 'No scanners were detected. If a scanner is installed, make sure that it is powered on and connected to the computer, and then try again. For information about adding or troubleshooting scanners, see Help and Support'. What can you do if you are prompted no scanners were detected in Windows 10? Below are 5 troubleshooting methods.
Mar 14, 2017  Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number. Dec 21, 2015  The problem is the feature in windows fax and scan is called 'scan routing' (its under tools) when you click on scan routing there is a check box next to folder location. As the feature explains itself you type the network location in the box, click the check box to 'enable it' and hit save.
Windows Fax And Scan Windows 10Method 1: Check the Setup Routine of the Scanner CarefullyIf you are prompted that Windows 10 Fax and Scan not detecting scanner, there may be something wrong with the setup of your scanner. Therefore, you should carefully check your scanner's setup. How to do that? You should:

Attention 1: Check the cables and power supply.
If the scanner is turned off, the computer can't connect to it correctly, which will cause the 'No scanner were detected' issue appearing. In order to make sure that the scanner is powered on, you need check whether you have plugged the scanner to the power source and then make sure you have turned on the switch button to connect the scanner to power supply. In addition, in order to avoid the cables faulty, plug in the cables correctly and firmly at the both ends to enable them to work properly.
Attention 2: Check the USB port.
Sometimes the cause of this error may lie in the USB port problem. Therefore, when you encounter the issue that no scanners were detected by Windows Fax and Scan, you can try to disconnect the scanner and then plug it into a different USB port to see if it works.
If you have checked all the above points that deserve your attention, you can see if the error message still persists. If it still persists, move on to the next method.
Method 2: Run Hardware and Devices TroubleshooterWhen you are facing the Windows Scan and Fax not detecting scanner issue, you can run the Windows 10 built-in Hardware and Devices troubleshooter to diagnose and fix the exact issue. Follow the below steps to run the troubleshooter:
Step 1: Open the Control Panel in your computer.
Step 2: Enter 'Troubleshooting' in the search blank and then the result will appear. Click Troubleshooting to go ahead.
Step 3: Click Hardware and Sound in the Troubleshooting window. https://truerload182.weebly.com/time-management-games-for-mac.html.
Help And Support Windows Fax And ScanStep 4: Look for Hardware and Devices under the Device section and click it.
Step 5: Click the Next button to continue. And finish the process according to the tips. The troubleshooter will try to find and fix problems with devices and hardware.
Method 3: Disable and Re-enable Windows Fax and ScanWhen the Windows Fax and Scan doesn't work normally, you can try to disable the Windows Fax and Scan via Windows Features, restart your computer and then re-enable it again. Sometimes such a simple operation can enable it back to work properly.
Step 1: Go to Control Panel, type 'Windows Features' in the search blank and click Turn Windows features on or off from results.
Step 2: Then you will come to the window of Windows Features. Scroll down to look for Print and Document Services and expand it.
Step 3: Uncheck the option of Windows Fax and Scan and click OK to save changes and exit.
Step 4: Restart your computer to make the changes take effects and then re-enable Windows Fax and Scan by re-checking the box again.
Method 4: Reconfigure the Scanner AgainWindows Fax and Scan no scanners were detected? Follow the below instructions to add the scanner as a new device in your Windows computer.
Step 1: Make sure that the scanner is power on during the process.
Step 2: Go to Control Panel, choose to view by large icons or small icons and then select Devices and Printers.
Step 3: Click Add a device in the Devices and Printers window.
Windows Fax And Scan Not Detecting ScannerStep 4: And then it will start searching printers or scanners for you. You'll see the devices listed in the box.
Windows 10 Fax And Scan InstallStep 5: Select the printer or scanner you intend to connect and click Next to continue.
Your Windows will start to install the printer or scanner for you, and wait for the process to finish. Then try to connect to your scanner and scan again to see if it works.
Method 5: Update the Scanner Drivers

Attention 1: Check the cables and power supply.
If the scanner is turned off, the computer can't connect to it correctly, which will cause the 'No scanner were detected' issue appearing. In order to make sure that the scanner is powered on, you need check whether you have plugged the scanner to the power source and then make sure you have turned on the switch button to connect the scanner to power supply. In addition, in order to avoid the cables faulty, plug in the cables correctly and firmly at the both ends to enable them to work properly.
Attention 2: Check the USB port.
Sometimes the cause of this error may lie in the USB port problem. Therefore, when you encounter the issue that no scanners were detected by Windows Fax and Scan, you can try to disconnect the scanner and then plug it into a different USB port to see if it works.
If you have checked all the above points that deserve your attention, you can see if the error message still persists. If it still persists, move on to the next method.
Method 2: Run Hardware and Devices TroubleshooterWhen you are facing the Windows Scan and Fax not detecting scanner issue, you can run the Windows 10 built-in Hardware and Devices troubleshooter to diagnose and fix the exact issue. Follow the below steps to run the troubleshooter:
Step 1: Open the Control Panel in your computer.
Step 2: Enter 'Troubleshooting' in the search blank and then the result will appear. Click Troubleshooting to go ahead.
Step 3: Click Hardware and Sound in the Troubleshooting window. https://truerload182.weebly.com/time-management-games-for-mac.html.
Help And Support Windows Fax And ScanStep 4: Look for Hardware and Devices under the Device section and click it.
Step 5: Click the Next button to continue. And finish the process according to the tips. The troubleshooter will try to find and fix problems with devices and hardware.
Method 3: Disable and Re-enable Windows Fax and ScanWhen the Windows Fax and Scan doesn't work normally, you can try to disable the Windows Fax and Scan via Windows Features, restart your computer and then re-enable it again. Sometimes such a simple operation can enable it back to work properly.
Step 1: Go to Control Panel, type 'Windows Features' in the search blank and click Turn Windows features on or off from results.
Step 2: Then you will come to the window of Windows Features. Scroll down to look for Print and Document Services and expand it.
Step 3: Uncheck the option of Windows Fax and Scan and click OK to save changes and exit.
Step 4: Restart your computer to make the changes take effects and then re-enable Windows Fax and Scan by re-checking the box again.
Method 4: Reconfigure the Scanner AgainWindows Fax and Scan no scanners were detected? Follow the below instructions to add the scanner as a new device in your Windows computer.
Step 1: Make sure that the scanner is power on during the process.
Step 2: Go to Control Panel, choose to view by large icons or small icons and then select Devices and Printers.
Step 3: Click Add a device in the Devices and Printers window.
Windows Fax And Scan Not Detecting ScannerStep 4: And then it will start searching printers or scanners for you. You'll see the devices listed in the box.
Windows 10 Fax And Scan InstallStep 5: Select the printer or scanner you intend to connect and click Next to continue.
Your Windows will start to install the printer or scanner for you, and wait for the process to finish. Then try to connect to your scanner and scan again to see if it works.
Method 5: Update the Scanner DriversIf all the above methods fail to solve this question, you should shift your focus to the scanner driver. Amtlib.dll photoshop cc 2017. Maybe the scanner driver is missing or outdated. Under this circumstance, you should try to update the scanner driver in order to fix this issue. How to update the scanner driver? Go to the manufacturer's website and download the latest scanner driver, and then install it to your computer manually.
Related Articles: Pokemon insurgence windows 10.
Don't panic, even the new Windows 10 has a fax and scan function to scan a page on the fly as a document and send as a fax!
1.) . Start Windows Fax and Scan!
 2.) . Problems with Fax and Scan on Windows-10!
 3.) . Create WFS shortcut on the Windows 10 desktop!
 4.) . Keyboard shortcut for Fax and Scan for Win-10!
 5.) . Start Fax and Scan automatically at Login or Windows Start!
 6.) . Pin Windows Fax and Scan on Start for Tablet Mode ie for MS Surface Pro!
You don't must use external a software such as . WinScan2PDF for a easy scan! 
 The quickest way to open the windows fax and scan software is with the command WFS, stands for (Windows Fax Scan) on MS all OS, also on the new Windows 10 whether desktop, tablet PC or Surface Pro / Go! 

1.) Start Windows Fax and Scan! Start the Windows 10 run dialog and simply type the WFS command, this will start the Windows 10 fax and scan software.
 (. see Image-1 Arrow 1 to 3) 
 If an email client program is installed, you can send the scanned documents as an e-mail or fax (. see Image-1 Arrow-4&5) . The default folder for the scanned documents is: Documents  Scanned Documents 
(Image-1) Windows 10 fax and scan software!
 Useful info from (c) Microsoft: 
 You can crop an image before scanning it by clicking Preview in the New Scan dialog box. In the preview area, drag the handles of the cropping tool to resize the image. 
 Some scanners can save individual documents or photos placed on the scanner bed as separate files on Windows 10. If your scanner has that capability, you can select the Preview or scan images as separate files check box. If your scanner doesn't have the capability, this option will be unavailable. 
 Scanned documents and photos in Windows 10 are stored in the Documents folder under Scanned Documents. If you create a new folder in the Windows 10 Scanned Documents folder, it won't appear in the Scan view until you close and reopen Windows Fax and Scan, or collapse and then expand the list of folders. 
 To change the default file name for a scanned document or photo, right-click the file name in the Scan view, and then click Rename. 
 To organize your scanned documents or photos on Windows 10, right-click the Scan folder in the left pane, and then click New Folder. To move a scanned document or photo to a folder, right-click the document, click Move to Folder, and then select the destination on Windows 10 OS. 
 You can automatically forward scanned documents to an e‑mail address or a Windows 10 network folder. To choose a forwarding option, click the Tools menu, and then click Scan Routing. Select your preferred option, enter the details, and then click Save on you Windows 10 PC. 
2.) Problems with Fax and Scan on Windows-10!  Sometimes, it can happen that the function, which is responsible for the Windows FAX and Scan, disappears at once with Windows 10, for example at big update of Windows or some new installation of Software! 
The Solution: . Fax and Scan is gone at once, Windows (10, 8.1)!
3.) Create WFS shortcut on the Windows 10 desktop! Please start the MS-Explore from Window 10 Run Command (Windows+R) and enter the command:
explorer /select, %WINDIR%System32wfs.exe
 This command will auto select the wfs.exe in C:WindowsSystem32 folder. 
 And now simply use Right Mouse Drag&Drop and rename the Desktop Shortcut for example to Fax&Scan on your Windows 10 Desktop. 
 You can also run The MS-Explorer Windows-Logo + E and Browse to C:WindowsSystem32 scroll down to Fax and Scan and select the wfs.exe File. 
(Image-2) Start Fax and Scan function from Windows-Desktop!


4.) Keyboard shortcut for Fax and Scan for Win-10!A keyboard shortcut is also handy to start the fax and scan program. You can also start it from the Run dialog, but a direct keyboard shortcut will favor some Windows users because it's handy. 
If you have created the desktop shortcut for the WFS , you can use it to assign a keyboard shortcut for the Windows Fax and Scan function! Simply right - click on the keyboard icon , then assign it to the Properties option and the shortcut key. (. see Image-3 Point 1, 2, 3, 4) 
Optionally you can start the program minimized in the task bar. (. see Image-3 Point 3) 

(Image-3) Keyboardshortcut for fax and scan!

5.) Windows Fax and Scan automatically at Login or Windows Start!If you would like to add Windows Fax and Scan to your own login, please use the shell:startup directory and if you want Windows Fax and Scanning to start when Windows starts 10, for all users shell:common startup folder. 
If you created the desktop shortcut for WFS, you can copy it directly to the Auto-Start folder. If you do not need the WFS desktop shortcut, just delete it afterwards. 
Optionally, you can start the program minimized with Windows. (. see Image-3 Point 3) 
See also: ►►► . Small Symbols in Task-Bar Windows 10!

(Image-4) Help Windows 10 has no fax and scan function, where is it?

6.) Pin Windows Fax and Scan on Start for Tablet Mode ie for MS Surface Pro! If you have created the desktop shortcut for the WFS, do a Mouse Right Click and Pin Windows Fax and Scan on Start for Tablet Mode ie for MS Surface Pro! 
(Image-5) Pin on Start The Fax and Scan feature!


(Image-6) Pin Windows Fax and Scan on Start 4 Tablet-Mode!

Info:
 As you can see above in Windows 10 shot screenshot, there is no great art to scan or fax under Windows You can easily apply this example as a solution on earlier versions of Microsoft Windows operating systems, whether it is a Windows Desktop Computer, or Mobile Tablet PC, Surface Pro / Go, or even a server operating system. 
See also: ►►► Hidden files and folders!

FAQ 64: Updated on: 11 July 2020 19:37